Question: How Do I Connect My BT Smart Hub?

What cable do I need to connect computer to router?

To connect a router to your computer with an Ethernet cable:Plug one end of an Ethernet cable into your modem.Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router.Plug in your router and allow at least 2 to 3 minutes for it to light up.More items….

How do I setup my Smart Hub 2?

Connecting your BT Smart Hub 2Recycle your existing kit. If you have it, unplug all your old broadband kit, including your old power plug. … Connect. … Plug in. … Position your Hub. … Turn Hub on. … Connect your devices. … Connection troubleshooting.Connecting your Wi-Fi disc.

What does a BT Smart Hub 2 do?

The Smart Hub 2 provides 7 antennas uniquely positioned to maximise power, the latest Wi-Fi technology, smart channel selection, smart scan and clever app-based services to help them set up and manage their home Wi-Fi. BT Smart Hub 2 comes with 2 DECT antennas and integrated support for Ultrafast broadband (G.

How do I set up BT Smart Hub?

Switching Smart Setup on and off on the BT Smart HubOpen a new web browser on a device connected to your Hub and type 192.168.1.254 in the address bar. … Click Smart Setup.Enter the admin password. … Click the “On/off” button to turn Smart Setup on or off.Remember once you make any changes you’ll need to save them.

What is the difference between BT Smart Hub and Smart Hub 2?

BT has a new Hub – the BT Smart Hub 2 – which it claims is the most powerful Wi-Fi hub of all the big broadband providers. While the size and premise remains much the same as the previous Smart Hub, the move to a rounded detail in the centre of this hub gives a strong hint as to what it wants to do.

Does BT Smart Hub 2 need a modem?

Smart Hub 2 has a modem built in but has no WAN port to use your own router through the Smart Hub modem. There is no way to enable ICMP port on modem in BT Smart Hubs, which prevents BT customers access networking tools like Think Broadbands Network Performance Monitor.

What is a WPS button?

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. IMPORTANT for Android TV™ models.

How do I connect my wireless printer to my BT Home Hub?

Re: How do I connect my printer to new by hub Its normally best to use the setup page of the printer, and select the BT Home Hub`s wireless signal, then enter the wireless password which comes with the home hub.

Can I get a BT Smart Hub free?

BT will give you a Smart Hub for free if you contract, or re-contract, for a minimum of 18 months. … BT’s wholly-owned, but arm’s length, subsidiary, Plusnet, is offering a rebadged version of the slightly older Home Hub 5 free to new customers and those who agree to re-contract with them.

Is the BT Smart Hub any good?

BT Smart Hub review: Performance It’s unlikely that you will, though, as the Smart Hub has by far the best Wi-Fi performance of any Home Hub – and most likely any current ISP router. Even without MU-MIMO enabled, we saw superb speeds in our tests, particularly using 802.11ac.

How do I connect my computer to my BT Smart Hub?

Connecting your computer to your BT Hub using the wireless keyFirst, make sure your computer has wireless turned on.Go to Start and click on Control Panel. … Now select Connect to a network.Right click on the “Wireless Network Connection” icon at the bottom of your screen, then click on View Available Wireless Networks.More items…

Is BT Smart Hub better than Home Hub 5?

The Smart Hub is slightly taller and wider than the Home Hub 5, but it contains massively improved hardware. It has seven antennas, which BT claims will let it offer significantly improved connection distances over the Home Hub 5, which had a 2 x 2 dual antenna setup. The Smart Hub also has a USB 3.0 port on its rear.

Can I use an Ethernet cable to connect to a printer?

Start the printer driver installer. When the [Connection Type] dialog box appears, select [Wired Network Connection (Ethernet)]. … Connect the LAN cable to the LAN Port on the back of the printer. Connect the LAN cable to an active LAN Port on the network.

How do I connect my wireless printer to a new router?

How To Connect an HP Printer to a Wireless Network Using Wi-Fi Protected SetupLocate the WPS button on your router, but do not press it yet. … Turn on the printer. … On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.More items…