How Do I Access My Belong Modem?

How do I find my modem username and password?

Connection HubOpen a web browser.When prompted, enter the Connection Hub username (the default is admin).Enter the Connection Hub password (the default is admin).Click OK.Click Wireless.The wireless settings are displayed, including the network name (SSID) and password..

Why can’t I access my modem?

The reason you can’t reach the modem, is because the IP address of the modem is on the same network as your LAN, but isn’t connected to the LAN (its connected to the WAN). The easy fix, if you can’t change your modem IP, is to change your LAN IP range. Use something like 192.168. 0.0/255 instead of 192.168.

How long does it take to connect to belong?

Once your modem arrives and you’ve set it up, it usually take five minutes for your service to be active, but in some cases we may need to do extra background work, which can take up to five days. You’ll know when your service is active because the internet service light on your modem will go solid green.

How do I change my modem settings?

Scroll to and click Save to update your wireless settings.Open a web browser.Type http://home or http://192.168.2.1 in the address bar, then press Enter on your keyboard.When prompted, enter the Connection Hub username (the default is admin).Enter the Connection Hub password (the default is admin).Click OK.More items…

Is belong good internet?

In 2019, Belong is still so basic. Belong offers a single unlimited data option, three NBN speed tier options, two ADSL2+ plans, and three mobile SIM plans. With more broadband providers than ever, Belong isn’t the only one breaking down the complicated NBN market but it is the best for streaming Netflix on a budget.

How do I find my modem?

Click the Start and then click the Programs folder. Next, click the Accessories and then the System Information folder. In the System Information window, click the + symbol next to Components. Click Modem and in the right side of the window you should be able to locate complete information about the modem.

How do I reset my belong modem?

Push the ‘reset’ button with your pen or paperclip until you feel a click, then hold. Hold for approximately 10 seconds (until all the lights on the modem turn off), then release. Wait for the power and Wi-Fi lights to turn back on (this will take approx 90 seconds)

Why is my Belong Internet not working?

If there’s no outage in your area, move onto the following tips: Check all your cables and filters/splitters are connected properly. Ensure that your modem is set-up properly. Check out our ADSL setup video to make sure you’re connected properly.

Is belong 3g or 4g?

Belong operates on part of the Telstra mobile network, with 4G coverage available to 97.9% of the Australian population and 3G coverage available to more than 98.8% of the population.

Is belong and Telstra the same?

Belong is powered by Telstra, but it doesn’t have access to the full extent of the Telstra network. Belong uses the Telstra wholesale network to deliver its plans, which reaches 98.8% of the population. The full Telstra network reaches 99.4%.

What is PPP on modem?

Stands for “Point-to-Point Protocol.” PPP is a protocol that enables communication and data transfer between two points or “nodes.” For many years, PPP was the standard way to establish a dial-up connection to an ISPs. As dial-up modems were superseded by broadband devices, PPP connections became increasing.

What modem does belong use?

If you joined Belong earlier than April 2018, you may have a Belong Sagemcom F@st 4315 or a Belong Technicolor TG797 modem. * What’s the difference between 2.4GHz and 5GHz wireless frequencies?: The Belong 4353 modem is a dual band modem, meaning it operates on two frequencies: 2.4GHz and 5GHz.